1、組件及實現的功能
成都網站制作、成都網站設計的關注點不是能為您做些什么網站，而是怎么做網站，有沒有做好網站，給創新互聯一個展示的機會來證明自己，這并不會花費您太多時間，或許會給您帶來新的靈感和驚喜。面向用戶友好，注重用戶體驗，一切以用戶為中心。
Keepalived：實現對Haproxy服務的高可用，并采用雙主模型配置;
Haproxy：實現對Nginx的負載均衡和讀寫分離;
Nginx：實現對HTTP請求的高速處理;2、架構設計圖3、Keepalived部署
在兩個節點上都需要執行安裝keepalived，命令如下：$ yum -y install keepalived
修改 172.16.25.109 節點上 keepalived.conf 文件配置，命令如下$ vim /etc/keepalived/keepalived.conf
修改后的內容如下：! Configuration File for keepalivedglobal_defs { notification_email { root@localhost } notification_email_from admin@lnmmp.com smtp_connect_timeout 3 smtp_server 127.0.0.1 router_id LVS_DEVEL}vrrp_script chk_maintaince_down { script "[[ -f /etc/keepalived/down ]] && exit 1 || exit 0" interval 1 weight 2}vrrp_script chk_haproxy { script "killall -0 haproxy" interval 1 weight 2}vrrp_instance VI_1 { interface eth0 state MASTER priority 100 virtual_router_id 125 garp_master_delay 1 authentication { auth_type PASS auth_pass 1e3459f77aba4ded } track_interface { eth0 } virtual_ipaddress { 172.16.25.10/16 dev eth0 label eth0:0 } track_script { chk_haproxy } notify_master "/etc/keepalived/notify.sh master 172.16.25.10" notify_backup "/etc/keepalived/notify.sh backup 172.16.25.10" notify_fault "/etc/keepalived/notify.sh fault 172.16.25.10"}vrrp_instance VI_2 { interface eth0 state BACKUP priority 99 virtual_router_id 126 garp_master_delay 1 authentication { auth_type PASS auth_pass 7615c4b7f518cede } track_interface { eth0 } virtual_ipaddress { 172.16.25.11/16 dev eth0 label eth0:1 } track_script { chk_haproxychk_maintaince_down } notify_master "/etc/keepalived/notify.sh master 172.16.25.11" notify_backup "/etc/keepalived/notify.sh backup 172.16.25.11" notify_fault "/etc/keepalived/notify.sh fault 172.16.25.11"}
同理修改 172.16.25.110 節點上 keepalived.conf 配置，內容如下：! Configuration File for keepalivedglobal_defs { notification_email { root@localhost } notification_email_from admin@lnmmp.com smtp_connect_timeout 3 smtp_server 127.0.0.1 router_id LVS_DEVEL}vrrp_script chk_maintaince_down { script "[[ -f /etc/keepalived/down ]] && exit 1 || exit 0" interval 1 weight 2}vrrp_script chk_haproxy { script "killall -0 haproxy" interval 1 weight 2}vrrp_instance VI_1 { interface eth0 state BACKUP priority 99 virtual_router_id 125 garp_master_delay 1 authentication { auth_type PASS auth_pass 1e3459f77aba4ded } track_interface { eth0 } virtual_ipaddress { 172.16.25.10/16 dev eth0 label eth0:0 } track_script { chk_haproxychk_maintaince_down } notify_master "/etc/keepalived/notify.sh master 172.16.25.10" notify_backup "/etc/keepalived/notify.sh backup 172.16.25.10" notify_fault "/etc/keepalived/notify.sh fault 172.16.25.10"}vrrp_instance VI_2 { interface eth0 state MASTER priority 100 virtual_router_id 126 garp_master_delay 1 authentication { auth_type PASS auth_pass 7615c4b7f518cede } track_interface { eth0 } virtual_ipaddress { 172.16.25.11/16 dev eth0 label eth0:1 } track_script { chk_haproxy } notify_master "/etc/keepalived/notify.sh master 172.16.25.11" notify_backup "/etc/keepalived/notify.sh backup 172.16.25.11" notify_fault "/etc/keepalived/notify.sh fault 172.16.25.11"}# vi /etc/keepalived/notify.sh#!/bin/bash# Author: Jason.Yu
$ service keepalived start4、Haproxy部署
在兩個節點上都需要執行安裝 HAProxy，命令如下：$ yum -y install haproxy
修改 172.16.25.109 和 172.16.25.110 節點上 haproxy.cfg 文件配置（兩節點配置文件內容一致），命令如下：$ vim /etc/haproxy/haproxy.cfg
配置文件內容如下：global log 127.0.0.1 local2 chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # 以后臺程序運行；defaults mode http # 選擇HTTP模式，即可進行7層過濾； log global option httplog # 可以得到更加豐富的日志輸出； option dontlognull option http-server-close # server端可關閉HTTP連接的功能； option forwardfor except 127.0.0.0/8 # 傳遞client端的IP地址給server端，并寫入“X-Forward_for”首部中； option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 30000listen stats mode http bind 0.0.0.0:1080 # 統計頁面綁定1080端口； stats enable # 開啟統計頁面功能； stats hide-version # 隱藏Haproxy版本號； stats uri /haproxyadmin?stats # 自定義統計頁面的訪問uri； stats realm Haproxy\ Statistics # 統計頁面密碼驗證時的提示信息； stats auth admin:admin # 為統計頁面開啟登錄驗證功能； stats admin if TRUE # 若登錄用戶驗證通過，則賦予管理功能；frontend http-in bind *:80 mode http log global option httpclose option logasap option dontlognull capture request header Host len 20 capture request header Referer len 60 acl url_static path_beg -i /static /p_w_picpaths /javascript /stylesheets acl url_static path_end -i .jpg .jpeg .gif .png .css .js .html use_backend static_servers if url_static # 符合ACL規則的，請求轉入后端靜態服務器 default_backend dynamic_servers # 默認請求轉入后端動態服務器backend static_servers balance roundrobin server imgsrv1 192.168.0.25:80 check maxconn 6000 # 靜態服務器，可配置多臺，還可設置權重weight；backend dynamic_servers balance source # 對于動態請求利用source調度算法，可一定程度上實現session保持；但最好利用cookie綁定的方式實現session保持 server websrv1 192.168.0.35:80 check maxconn 1000 # 動態服務器，可配置多臺，還可設置權重weight；
兩個節點執行啟動服務，命令如下：$ service haproxy start5、Nginx部署yum -y groupinstall “Development tools”yum -y groupinstall “Server Platform Development”yum install gcc openssl-devel pcre-devel zlib-develgroupadd -r nginxuseradd -r -g nginx -s /sbin/nologin -M nginxtar xf nginx-1.4.7.tar.gzcd nginx-1.4.7mkdir -pv /var/tmp/nginx./configure \ --prefix=/usr \ --sbin-path=/usr/sbin/nginx \ --conf-path=/etc/nginx/nginx.conf \ --error-log-path=/var/log/nginx/error.log \ --http-log-path=/var/log/nginx/access.log \ --pid-path=/var/run/nginx/nginx.pid \ --lock-path=/var/lock/nginx.lock \ --user=nginx \ --group=nginx \ --with-http_ssl_module \ --with-http_flv_module \ --with-http_stub_status_module \ --with-http_gzip_static_module \ --http-client-body-temp-path=/var/tmp/nginx/client/ \ --http-proxy-temp-path=/var/tmp/nginx/proxy/ \ --http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ \ --http-uwsgi-temp-path=/var/tmp/nginx/uwsgi \ --http-scgi-temp-path=/var/tmp/nginx/scgi \ --with-pcremake && make install
配置服務腳本vi /etc/init.d/nginx # 配置服務腳本#!/bin/sh## nginx - this script starts and stops the nginx daemon## chkconfig: - 85 15# description: Nginx is an HTTP(S) server, HTTP(S) reverse \# proxy and IMAP/POP3 proxy server# processname: nginx# config: /etc/nginx/nginx.conf# config: /etc/sysconfig/nginx# pidfile: /var/run/nginx.pid# Source function library.. /etc/rc.d/init.d/functions# Source networking configuration.. /etc/sysconfig/network# Check that networking is up.[ "$NETWORKING" = "no" ] && exit 0nginx="/usr/sbin/nginx"prog=$(basename $nginx)NGINX_CONF_FILE="/etc/nginx/nginx.conf"[ -f /etc/sysconfig/nginx ] && . /etc/sysconfig/nginxlockfile=/var/lock/subsys/nginxmake_dirs() { # make required directories user=`nginx -V 2>&1 | grep "configure arguments:" | sed 's/[^*]*--user=\([^ ]*\).*/\1/g' -` options=`$nginx -V 2>&1 | grep 'configure arguments:'` for opt in $options; do if [ `echo $opt | grep '.*-temp-path'` ]; then value=`echo $opt | cut -d "=" -f 2` if [ ! -d "$value" ]; then # echo "creating" $value mkdir -p $value && chown -R $user $value fi fi done}start() { [ -x $nginx ] || exit 5 [ -f $NGINX_CONF_FILE ] || exit 6 make_dirs echo -n $"Starting $prog: " daemon $nginx -c $NGINX_CONF_FILE retval=$? echo [ $retval -eq 0 ] && touch $lockfile return $retval}stop() { echo -n $"Stopping $prog: " killproc $prog -QUIT retval=$? echo [ $retval -eq 0 ] && rm -f $lockfile return $retval}restart() { configtest || return $? stop sleep 1 start}reload() { configtest || return $? echo -n $"Reloading $prog: " killproc $nginx -HUP RETVAL=$? echo}force_reload() { restart}configtest() { $nginx -t -c $NGINX_CONF_FILE}rh_status() { status $prog}rh_status_q() { rh_status >/dev/null 2>&1}case "$1" in start) rh_status_q && exit 0 $1 ;; stop) rh_status_q || exit 0 $1 ;; restart|configtest) $1 ;; reload) rh_status_q || exit 7 $1 ;; force-reload) force_reload ;; status) rh_status ;; condrestart|try-restart) rh_status_q || exit 0 ;; *) echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}" exit 2esacchmod +x /etc/init.d/nginx # 復***務腳本執行權限vi /etc/nginx/nginx.conf # 編輯主配置文件worker_processes 2;error_log /var/log/nginx/nginx.error.log;pid /var/run/nginx.pid;events { worker_connections 1024;}http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; sendfile on; keepalive_timeout 65; server { listen 80; server_name xxrenzhe.lnmmp.com; access_log /var/log/nginx/nginx.access.log main; location / { root /www/lnmmp.com; index index.php index.html index.htm; } error_page 404 /404.html; error_page 500 502 503 504 /50x.html; location = /50x.html { root /www/lnmmp.com; } location ~ \.php$ { root /www/lnmmp.com; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } }}vi /etc/nginx/fastcgi_params # 編輯fastcgi參數文件fastcgi_param GATEWAY_INTERFACE CGI/1.1;fastcgi_param SERVER_SOFTWARE nginx;fastcgi_param QUERY_STRING $query_string;fastcgi_param REQUEST_METHOD $request_method;fastcgi_param CONTENT_TYPE $content_type;fastcgi_param CONTENT_LENGTH $content_length;fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;fastcgi_param SCRIPT_NAME $fastcgi_script_name;fastcgi_param REQUEST_URI $request_uri;fastcgi_param DOCUMENT_URI $document_uri;fastcgi_param DOCUMENT_ROOT $document_root;fastcgi_param SERVER_PROTOCOL $server_protocol;fastcgi_param REMOTE_ADDR $remote_addr;fastcgi_param REMOTE_PORT $remote_port;fastcgi_param SERVER_ADDR $server_addr;fastcgi_param SERVER_PORT $server_port;fastcgi_param SERVER_NAME $server_name;
啟動服務service nginx configtest # 服務啟動前先驗證配置文件是否正確service nginx startps -ef |grep nginx # 檢查nginx進程，尤其是worker進程是否與worker_processes值一致ss -antupl |grep 80 # 檢查服務端口是否啟動6、訪問驗證
Haproxy 統計頁面測試
動靜分離測試
高可用測試
到此 Nginx高可用集群構建（Keepalived+Haproxy+Nginx）介紹完成。
到此這篇關于Nginx實現高可用集群構建(Keepalived+Haproxy+Nginx)的文章就介紹到這了,更多相關Nginx 高可用集群內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
重慶分公司
重慶分公司
