服務器

本文主要解析一下ngx_http_core_module、ngx_http_limit_conn_module以及ngx_http_limit_req_module中的limit相關配置參數。

十多年的寧鄉網站建設經驗，針對設計、前端、開發、售后、文案、推廣等六對一服務，響應快，48小時及時工作處理。成都營銷網站建設的優勢是能夠根據用戶設備顯示端的尺寸不同，自動調整寧鄉建站的顯示方式，使網站能夠適用不同顯示終端，在瀏覽器中調整網站的寬度，無論在任何一種瀏覽器上瀏覽網站，都能展現優雅布局與設計，從而大程度地提升瀏覽體驗。成都創新互聯從事“寧鄉網站設計”,“寧鄉網站推廣”以來，每個客戶項目都認真落實執行。

limit_rate

名稱 默認配置 作用域 官方說明 中文解讀 模塊 limit_rate limit_rate 0; http, server, location, if in location Limits the rate of response transmission to a client. The rate is specified in bytes per second. The zero value disables rate limiting. The limit is set per a request, and so if a client simultaneously opens two connections, the overall rate will be twice as much as the specified limit. 指定每秒該連接能下載的bytes,主要用來限制個別請求的帶寬 ngx_http_core_module limit_rate_after limit_rate_after 0; http, server, location, if in location Sets the initial amount after which the further transmission of a response to a client will be rate limited. 設置多少bytes過后將啟動limit計數,如果小于此值則不限速 ngx_http_core_module limit_except 沒有默認值 location Limits allowed HTTP methods inside a location. The method parameter can be one of the following: GET, HEAD, POST, PUT, DELETE, MKCOL, COPY, MOVE, OPTIONS, PROPFIND, PROPPATCH, LOCK, UNLOCK, or PATCH. Allowing the GET method makes the HEAD method also allowed 設置除了指定的http methods外其他method將被限制，允許GET就自動允許HEAD方法 ngx_http_core_module

實例

 location /downloads {
      limit_rate_after 1m;
      limit_rate 500k;
    }

    location / {
      proxy_pass http://localhost:3000;
      limit_except GET {
        deny all;
      }
    }

limit_conn

名稱 默認配置 作用域 官方說明 中文解讀 模塊 limit_conn 沒有默認值,語法 limit_conn zone number; http, server, location Sets the shared memory zone and the maximum allowed number of connections for a given key value. When this limit is exceeded, the server will return the error in reply to a request. 指定一個zone的每個key連接數 ngx_http_limit_conn_module limit_conn_zone 沒有默認值,語法 limit_conn_zone key zone=name:size; http Sets parameters for a shared memory zone that will keep states for various keys. In particular, the state includes the current number of connections. The key can contain text, variables, and their combination. Requests with an empty key value are not accounted. 第一個參數是key,第二個參數是指定zone及其存放元數據(key,current num of conns per key,zone size)的共享內存大小 ngx_http_limit_conn_module limit_conn_log_level limit_conn_log_level error; http, server, location Sets the desired logging level for cases when the server limits the number of connections. This directive appeared in version 0.8.18. 指定當觸發limit的時候日志打印級別 ngx_http_limit_conn_module

實例

http {
  limit_conn_zone $binary_remote_addr zone=ips:10m;
  limit_conn_zone $server_name zone=servers:10m;
  limit_conn_log_level notice;
  server {
    # these limits apply to the whole virtual server
    limit_conn ips 10;

    # only 1000 simultaneous connections to the same server_name
    limit_conn servers 1000;
  }
}

limit_req

名稱 默認配置 作用域 官方說明 中文解讀 模塊 limit_req 沒有默認值,語法 limit_req zone=name [burst=number] [nodelay]; http, server, location Sets the shared memory zone and the maximum burst size of requests. If the requests rate exceeds the rate configured for a zone, their processing is delayed such that requests are processed at a defined rate. Excessive requests are delayed until their number exceeds the maximum burst size in which case the request is terminated with an error. 指定zone的burst大小 ngx_http_limit_req_module limit_req_zone 沒有默認值,語法 limit_req_zone key zone=name:size rate=rate; http Sets parameters for a shared memory zone that will keep states for various keys. In particular, the state stores the current number of excessive requests. The key can contain text, variables, and their combination. Requests with an empty key value are not accounted. 第一個參數指定key,第二個參數指定zone名稱和元數據的內存大小,第三個參數rate指定單位時間的請求數閾值 ngx_http_limit_req_module limit_req_log_level limit_req_log_level error; http, server, location Sets the desired logging level for cases when the server refuses to process requests due to rate exceeding, or delays request processing. Logging level for delays is one point less than for refusals. 指定觸發req limit時打印的日志級別 ngx_http_limit_req_module

實例

http {
 limit_req_zone $binary_remote_addr zone=myreqzone:10m
 limit_req_log_level warn;
 server {
  ## 每個ip限定10個連接數
  ## 正常一個瀏覽器給每個host開兩到三個連接
  ## 觸發的話會返回503
  ## nodelay表示一上來就直接計算,不經過一些預熱后再計算
  limit_req zone=myreqzone burst=10 nodelay;
 }
}

以上就是我們整理的nginx中l(wèi)imit配置參數的全部?jī)?nèi)容，大家可以在下方的留言區討論，感謝你對創新互聯的支持。

網頁題目：解讀nginx中l(wèi)imit配置參數
文章源于：http://weahome.cn/article/cpicos.html