這篇文章主要為大家展示了“壓測工具之Sysbench怎么用”，內容簡而易懂，條理清晰，希望能夠幫助大家解決疑惑，下面讓小編帶領大家一起研究并學習一下“壓測工具之Sysbench怎么用”這篇文章吧。
一、sysbench下載
項目地址：https://launchpad.net/sysbench
下載地址：https://github.com/akopytov/sysbench/archive/1.0.3.tar.gz
二、sysbench安裝
[root@DB_TEST tools]# tar -xzvf sysbench-1.0.3.tar.gz
[root@DB_TEST tools]# cd sysbench-1.0.3
[root@DB_TEST sysbench-1.0.3]# ./autogen.sh
[root@DB_TEST sysbench-1.0.3]#./configure --prefix=/usr/local/sysbench --with-mysql
[root@DB_TEST sysbench-1.0.3]# make
[root@DB_TEST sysbench-1.0.3]# make install
[root@DB_TEST sysbench-1.0.3]# cp -rp /usr/local/sysbench/bin/sysbench /usr/bin/
[root@DB_TEST sysbench-1.0.3]# /usr/local/sysbench/bin/sysbench --help
點擊(此處)折疊或打開
[root@BJ-133-22 sysbench-1.0.3]# /usr/local/sysbench/bin/sysbench --help
Usage:
sysbench [options]... [testname] [command]
Commands implemented by most tests: prepare run cleanup help
General options:
--threads=N number of threads to use [1]
--events=N limit for total number of events [0]
--time=N limit for total execution time in seconds [10]
--forced-shutdown=STRING number of seconds to wait after the --time limit before forcing shutdown, or 'off' to disable [off]
--thread-stack-size=SIZE size of stack per thread [64K]
--rate=N average transactions rate. 0 for unlimited rate [0]
--report-interval=N periodically report intermediate statistics with a specified interval in seconds. 0 disables intermediate reports [0]
--report-checkpoints=[LIST,...] dump full statistics and reset all counters at specified points in time. The argument is a list of comma-separated values representing the amount of time in seconds elapsed from start of test when report checkpoint(s) must be performed. Report checkpoints are off by default. []
--debug[=on|off] print more debugging info [off]
--validate[=on|off] perform validation checks where possible [off]
--help[=on|off] print help and exit [off]
--version[=on|off] print version and exit [off]
--config-file=FILENAME File containing command line options
--tx-rate=N deprecated alias for --rate [0]
--max-requests=N deprecated alias for --events [0]
--max-time=N deprecated alias for --time [0]
--num-threads=N deprecated alias for --threads [1]
Pseudo-Random Numbers Generator options:
--rand-type=STRING random numbers distribution {uniform,gaussian,special,pareto} [special]
--rand-spec-iter=N number of iterations used for numbers generation [12]
--rand-spec-pct=N percentage of values to be treated as 'special' (for special distribution) [1]
--rand-spec-res=N percentage of 'special' values to use (for special distribution) [75]
--rand-seed=N seed for random number generator. When 0, the current time is used as a RNG seed. [0]
--rand-pareto-h=N parameter h for pareto distibution [0.2]
Log options:
--verbosity=N verbosity level {5 - debug, 0 - only critical messages} [3]
--percentile=N percentile to calculate in latency statistics (1-100). Use the special value of 0 to disable percentile calculations [95]
--histogram[=on|off] print latency histogram in report [off]
General database options:
--db-driver=STRING specifies database driver to use ('help' to get list of available drivers)
--db-ps-mode=STRING prepared statements usage mode {auto, disable} [auto]
--db-debug[=on|off] print database-specific debug information [off]
Compiled-in database drivers:
mysql - MySQL driver
mysql options:
--mysql-host=[LIST,...] MySQL server host [localhost]
--mysql-port=[LIST,...] MySQL server port [3306]
--mysql-socket=[LIST,...] MySQL socket
--mysql-user=STRING MySQL user [sbtest]
--mysql-password=STRING MySQL password []
--mysql-db=STRING MySQL database name [sbtest]
--mysql-ssl[=on|off] use SSL connections, if available in the client library [off]
--mysql-ssl-cipher=STRING use specific cipher for SSL connections []
--mysql-compression[=on|off] use compression, if available in the client library [off]
--mysql-debug[=on|off] trace all client library calls [off]
--mysql-ignore-errors=[LIST,...] list of errors to ignore, or "all" [1213,1020,1205]
--mysql-dry-run[=on|off] Dry run, pretend that all MySQL client API calls are successful without executing them [off]
Compiled-in tests:
fileio - File I/O test
cpu - CPU performance test
memory - Memory functions speed test
threads - Threads subsystem performance test
mutex - Mutex performance test
See 'sysbench help' for a list of options for each test.
三、sysbench使用
1、CPU性能測試
cpu性能測試：找范圍內大素數{時間越短越好}
cpu性能測試主要是根據素數的加法運算，這里指定大素數(質數)為80000，--num-threads=`grep "processor" /proc/cpuinfo | wc -l`指定線程數，默認是1
/usr/local/sysbench/bin/sysbench --test=cpu --cpu-max-prime=80000 run
點擊(此處)折疊或打開
[root@db_test ~]# /usr/local/sysbench/bin/sysbench --test=cpu --cpu-max-prime=80000 run
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Prime numbers limit: 80000
Initializing worker threads...
Threads started!
General statistics:
total time: 10.0057s
total number of events: 520
Latency (ms):
min: 18.74
avg: 19.24
max: 19.39
95th percentile: 19.29
sum: 10005.32
Threads fairness:
events (avg/stddev): 520.0000/0.00
execution time (avg/stddev): 10.0053/0.00
實際環境CPU拷機壓測腳本如下：
echo -e "進行CPU壓力測試: 尋找小于1千萬的大質數,并發線程數10,大請求數100 "
/usr/local/bin/sysbench --num-threads=10 --max-requests=100 --test=cpu --debug --cpu-max-prime=10000000 run
2、內存性能測試
sysbench 測試memory的時候是順序讀或?qū)憙?nèi)存的。根據選項的不同，每次操作過程中，每個線程可以獲取global或本地的數據塊
內存：以不同塊大小傳輸一定數量的數據吞吐量大小{越大越好}
點擊(此處)折疊或打開
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --test=memory help
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
memory options:
--memory-block-size=SIZE size of memory block for test [1K] 測試時內存塊大小
--memory-total-size=SIZE total size of data to transfer [100G] 傳輸數據總大小
--memory-scope=STRING memory access scope {global,local} [global] 內存訪問范圍
--memory-hugetlb[=on|off] allocate memory from HugeTLB pool [off] 從 HugeTLB pool內存分配
--memory-oper=STRING type of memory operations {read, write, none} [write] 內存操作類型
--memory-access-mode=STRING memory access mode {seq,rnd} [seq] 存儲器存取方式
示例：測試傳輸數據總量為5G，每個塊大小是1K（一般設置是8K），連續讀寫的情況下，吞吐量3435.87 MiB/sec
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --test=memory --memory-block-size=1K --memory-total-size=5G run
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Initializing worker threads...
Threads started!
Operations performed: 5242880 (3518332.06 ops/sec)
5120.00 MiB transferred (3435.87 MiB/sec)
General statistics:
total time: 1.4883s
total number of events: 5242880
Latency (ms):
min: 0.00
avg: 0.00
max: 0.03
95th percentile: 0.00
sum: 631.01
Threads fairness:
events (avg/stddev): 5242880.0000/0.00
execution time (avg/stddev): 0.6310/0.00
實際內存壓力測試腳本：
echo -e "進行內存壓力測試: 測試范圍32G,并發線程數10,大請求數100, 讀 "
/usr/local/bin/sysbench --num-threads=10 --max-requests=100 --test=memory --memory-block-size=8K --memory-total-size=${MEM}G --memory-oper=read run
echo -e "進行內存壓力測試: 測試范圍32G,并發線程數10,大請求數100, 寫 "
/usr/local/bin/sysbench --num-threads=10 --max-requests=100 --test=memory --memory-block-size=8K --memory-total-size=${MEM}G --memory-oper=write run
3、磁盤IO性能測試
IO性能測試：不同場景下IOPS{越大越好}
點擊(此處)折疊或打開
[root@db_test sysbench-1.0.3]# /usr/local/sysbench/bin/sysbench --test=fileio help
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
fileio options:
--file-num=N number of files to create [128]
--file-block-size=N block size to use in all IO operations [16384]
--file-total-size=SIZE total size of files to create [2G]
--file-test-mode=STRING test mode {seqwr, seqrewr, seqrd, rndrd, rndwr, rndrw}
--file-io-mode=STRING file operations mode {sync,async,mmap} [sync]
--file-async-backlog=N number of asynchronous operatons to queue per thread [128]
--file-extra-flags=STRING additional flags to use on opening files {sync,dsync,direct} []
--file-fsync-freq=N do fsync() after this number of requests (0 - don't use fsync()) [100]
--file-fsync-all[=on|off] do fsync() after each write operation [off]
--file-fsync-end[=on|off] do fsync() at the end of test [on]
--file-fsync-mode=STRING which method to use for synchronization {fsync, fdatasync} [fsync]
--file-merged-requests=N merge at most this number of IO requests if possible (0 - don't merge) [0]
--file-rw-ratio=N reads/writes ratio for combined test [1.5]
--file-num=N 創建測試文件數量，默認是 [128]
--file-block-size=N 測試時文件塊大小，默認是[16384]，即16K
--file-total-size=SIZE 測試文件的總大小，默認是 [2G]
--file-test-mode=STRING 測試模式 {seqwr（順序?qū)懀? seqrewr（順序讀寫）, seqrd（順序讀）, rndrd（隨機讀）, rndwr（隨機寫）, rndrw（隨機讀寫）}
--file-io-mode=STRING 文件操作模式{sync,async,mmap} [sync]
--file-extra-flags=STRING 使用額外的標志打開文件 {sync,dsync,direct} []
--file-fsync-freq=N 執行fsync()頻率，0表示不使用，默認100
--file-fsync-all=[on|off] 每執行一次寫操作執行一次fsync(),默認 [off]
--file-fsync-end=[on|off] 測試結束執行fsync(),默認 [on]
--file-fsync-mode=STRING 同步方法 {fsync, fdatasync} [fsync]
--file-merged-requests=N 如果可以，則合并IO請求數，默認0表示不合并
--file-rw-ratio=N 測試讀寫比例，默認[1.5]
seqwr 順序?qū)懭?br/>seqrewr 順序重寫
seqrd 順序讀取
rndrd 隨機讀取
rndwr 隨機寫入
rndrw 混合隨機讀/寫
FileIO示例01：prepare 命令創建了128個文件總共大小為10G ，文件讀寫模式為隨機讀寫混合方式。run 命令則進行測試，并返回結果，cleanup 刪除測試產生的文件！
##Fileio準備工作，生成測試數據（最好比內存的2倍大）
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --num-threads=16 --test=fileio --file-total-size=10G --file-test-mode=rndrw prepare
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
WARNING: --num-threads is deprecated, use --threads instead
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
128 files, 81920Kb each, 10240Mb total
Creating files for the test...
Extra file open flags: 0
Creating file test_file.0
...
Creating file test_file.127
10737418240 bytes written in 9.96 seconds (1027.97 MiB/sec).
##正式執行FileIO測試
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --num-threads=16 --test=fileio --file-total-size=10G --file-test-mode=rndrw run
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
WARNING: --num-threads is deprecated, use --threads instead
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
Running the test with following options:
Number of threads: 16
Initializing random number generator from current time
Extra file open flags: 0
128 files, 80MiB each
10GiB total file size
Block size 16KiB
Number of IO requests: 0
Read/Write ratio for combined random IO test: 1.50
Periodic FSYNC enabled, calling fsync() each 100 requests.
Calling fsync() at the end of test, Enabled.
Using synchronous I/O mode
Doing random r/w test
Initializing worker threads...
Threads started!
File operations:
reads/s: 1449.16
writes/s: 965.91
fsyncs/s: 3083.55
Throughput:
read, MiB/s: 22.64
written, MiB/s: 15.09
General statistics:
total time: 10.4176s
total number of events: 57291
Latency (ms):
min: 0.00
avg: 2.87
max: 825.08
95th percentile: 0.17
sum: 164312.66
Threads fairness:
events (avg/stddev): 3580.6875/469.53
execution time (avg/stddev): 10.2695/0.08
IO密切相關的包括每秒請求數和總吞吐量，其中請求數是(1449.16+965.91+3083.55)/s，吞吐量是（22.64+15.09）MB/s
##清理創建的文件
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --num-threads=16 --test=fileio --file-total-size=10G --file-test-mode=rndrw cleanup
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
WARNING: --num-threads is deprecated, use --threads instead
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
Removing test files...
實際環境FILEIO壓力測試腳本：
echo -e "進行IO壓力測試: 20個文件,每個10GB,隨機讀寫 "
/usr/local/bin/sysbench --file-num=20 --num-threads=20 --test=fileio --file-total-size=${HDD}G --max-requests=1000000 --file-test-mode=rndrw prepare
/usr/local/bin/sysbench --file-num=20 --num-threads=20 --test=fileio --file-total-size=${HDD}G --max-requests=1000000 --file-test-mode=rndrw run
/usr/local/bin/sysbench --file-num=20 --num-threads=20 --test=fileio --file-total-size=${HDD}G --max-requests=1000000 --file-test-mode=rndrw cleanup
4、thread測試
線程調度：線程并發執行，循環響應信號量花費的時間{越少越好}
測試線程調度器的性能。對于高負載情況下測試線程調度器的行為非常有用測試線程調度器的性能。對于高負載情況下測試線程調度器的行為非常有用
點擊(此處)折疊或打開
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --test=threads help
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
threads options:
--thread-yields=N number of yields to do per request [1000] 每個請求產生多少個線程，默認[1000]
--thread-locks=N number of locks per thread [8] 每個線程的鎖數量，默認 [8]
示例：
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --num-threads=64 --test=threads --thread-yields=100 --thread-locks=2 run
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
WARNING: --num-threads is deprecated, use --threads instead
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
Running the test with following options:
Number of threads: 64
Initializing random number generator from current time
Initializing worker threads...
Threads started!
General statistics:
total time: 10.0043s
total number of events: 102842
Latency (ms):
min: 0.02
avg: 6.22
max: 28.83
95th percentile: 15.00
sum: 640039.96
Threads fairness:
events (avg/stddev): 1606.9062/31.79
execution time (avg/stddev): 10.0006/0.00
5、互斥鎖測試
互斥鎖：并發線程同時申請互斥鎖循環一定次數花費的時間{越少越好}
測試互斥鎖的性能，方式是模擬所有線程在同一時刻并發運行，并都短暫請求互斥鎖
點擊(此處)折疊或打開
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --test=mutex help
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
mutex options:
--mutex-num=N total size of mutex array [4096] 數組互斥總大小，默認[4096]
--mutex-locks=N number of mutex locks to do per thread [50000] 每個線程互斥鎖的數量，默認 [50000]
--mutex-loops=N number of empty loops to do inside mutex lock [10000] 內部互斥鎖的空循環數量，默認 [10000]
所有線程同時執行，獲取短時間的mutex lock，以便測試mutex的實現！
示例：
[root@db_test fileio]# /usr/local/sysbench/bin/sysbench --test=mutex --mutex-num=4096 --mutex-locks=50000 --mutex-loops=20000 run
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.3 (using bundled LuaJIT 2.1.0-beta2)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Initializing worker threads...
Threads started!
General statistics:
total time: 0.0021s
total number of events: 1
Latency (ms):
min: 2.05
avg: 2.05
max: 2.05
95th percentile: 2.03
sum: 2.05
Threads fairness:
events (avg/stddev): 1.0000/0.00
execution time (avg/stddev): 0.0020/0.00
以上是“壓測工具之Sysbench怎么用”這篇文章的所有內容，感謝各位的閱讀！相信大家都有了一定的了解，希望分享的內容對大家有所幫助，如果還想學習更多知識，歡迎關注創新互聯-成都網站建設公司行業資訊頻道！
重慶分公司
重慶分公司
