這篇文章主要介紹“Linux中使用fdisk命令進行分區時出現警告信息怎么辦”，在日常操作中，相信很多人在Linux中使用fdisk命令進行分區時出現警告信息怎么辦問題上存在疑惑，小編查閱了各式資料，整理出簡單好用的操作方法，希望對大家解答”Linux中使用fdisk命令進行分區時出現警告信息怎么辦”的疑惑有所幫助！接下來，請跟著小編一起來學習吧！

10年積累的網站制作、成都網站設計經驗，可以快速應對客戶對網站的新想法和需求。提供各種問題對應的解決方案。讓選擇我們的客戶得到更好、更有力的網絡服務。我雖然不認識你，你也不認識我。但先制作網站后付款的網站建設流程，更有建平免費網站建設讓你可以放心的選擇與我們合作。

在Linux中使用fdisk命令進行分區時，有時會遇到“WARNING: Re-reading the partition table failed with error 16: Device or resource busy.The kernel still uses the old table.The new table will be used at the next reboot.”這種告警信息。如下所示

[root@localhost ~]# fdisk /dev/sde

The number of cylinders for this disk is set to 18928.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/sde: 155.6 GB, 155692564480 bytes

255 heads, 63 sectors/track, 18928 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sde1 1 18275 146793906 5 Extended

/dev/sde5 1 18275 146793874+ 83 Linux

Command (m for help): n

Command action

l logical (5 or over)

p primary partition (1-4)

p

Partition number (1-4): 2

First cylinder (18276-18928, default 18276):

Using default value 18276

Last cylinder or +size or +sizeM or +sizeK (18276-18928, default 18928):

Using default value 18928

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.

The kernel still uses the old table.

The new table will be used at the next reboot.

Syncing disks.

此時使用fdisk命令看不到新建的分區信息，可以使用partprobe命令解決這個問題而不用重啟系統，因?yàn)閜artprobe可以使kernel重新讀取分區信息，從而避免重啟系統。

partprobe - inform the OS of partition table changes

DESCRIPTION

This manual page documents briefly the partprobe command.

partprobe is a program that informs the operating system kernel of partition table changes, by requesting that the operating system re-read the partition table.

到此，關于“Linux中使用fdisk命令進行分區時出現警告信息怎么辦”的學習就結束了，希望能夠解決大家的疑惑。理論與實踐的搭配能更好的幫助大家學習，快去試試吧！若想繼續學習更多相關知識，請繼續關注創新互聯網站，小編會繼續努力為大家?guī)?lái)更多實用的文章！