前言
創新互聯公司-專業網站定制、快速模板網站建設、高性價比肅南裕固族自治網站開發、企業建站全套包干低至880元,成熟完善的模板庫,直接使用。一站式肅南裕固族自治網站制作公司更省心,省錢,快速模板網站建設找我們，業務覆蓋肅南裕固族自治地區。費用合理售后完善，10余年實體公司更值得信賴。
最近手頭一臺運行在 Hyper-V 下面抓數據的服務器 (Ubuntu 16.04) 磁盤空間不夠了，之前也沒有把數據單獨放到一個分區，所以只能想辦法把根目錄給搞大一點。之前沒有處理過這樣的問題，網上搜了很多資料，現在把拓展方法記錄，分享出來。
建議在操作之前做好備份工作
步驟概覽
調大物理磁盤
虛擬機關機，然后直接在虛擬機管理里面操作。
現在把磁盤從 100G 調整到了 300G
確定要操作的磁盤
先看下磁盤使用情況，運行命令
root@vm003:~# df -h Filesystem Size Used Avail Use% Mounted on udev 3.9G 0 3.9G 0% /dev tmpfs 798M 8.6M 789M 2% /run /dev/mapper/Ubuntu-root 94G 88G 1.9G 98% / tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 472M 382M 66M 86% /boot tmpfs 100K 0 100K 0% /run/lxcfs/controllers tmpfs 798M 0 798M 0% /run/user/0
雖然我們已經把物理磁盤調整到了 300G，但是根目錄還是100G的樣子，已用 98%
運行命令
root@vm003:~# fdisk -l Disk /dev/sda: 300 GiB, 322122547200 bytes, 629145600 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: dos Disk identifier: 0xa88f1366 Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 999423 997376 487M 83 Linux /dev/sda2 1001470 209713151 208711682 99.5G 5 Extended /dev/sda5 1001472 209713151 208711680 99.5G 8e Linux LVM Partition 2 does not start on physical sector boundary. Disk /dev/mapper/Ubuntu-root: 95.5 GiB, 102563315712 bytes, 200318976 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/mapper/Ubuntu-swap_1: 4 GiB, 4294967296 bytes, 8388608 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes
可以看到 /dev/sda 已經確實被調整到了300GiB，只是系統還沒用到。
也知道了我們要操作 /dev/sda
擴大 LVM 邏輯分區所在的物理分區
運行命令
root@vm003:~# parted /dev/sda GNU Parted 3.2 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print # 查看分區 Model: Msft Virtual Disk (scsi) Disk /dev/sda: 322GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 512MB 511MB primary ext2 boot 2 513MB 107GB 107GB extended 5 513MB 107GB 107GB logical lvm (parted) resizepart 2 # 調整 sda2 分區大小 End? [107GB]? -0 # 直接充滿 (parted) print # 再次查看 Model: Msft Virtual Disk (scsi) Disk /dev/sda: 322GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 512MB 511MB primary ext2 boot 2 513MB 322GB 322GB extended 5 513MB 107GB 107GB logical lvm (parted) q # 完成退出 Information: You may need to update /etc/fstab.
現在我們已經把 /dev/sda2 給拓展出來了
新增 LVM 邏輯分區
運行命令
重慶分公司
重慶分公司
root@vm003:~# fdisk /dev/sda
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p # 查看現在的分區情況
Disk /dev/sda: 300 GiB, 322122547200 bytes, 629145600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xa88f1366
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 999423 997376 487M 83 Linux
/dev/sda2 1001470 629145599 628144130 299.5G 5 Extended
/dev/sda5 1001472 209713151 208711680 99.5G 8e Linux LVM
Partition 2 does not start on physical sector boundary.
Command (m for help): n # 新增分區，選擇邏輯分區，起止點看情況輸入，默認值是填充滿整個磁盤
All space for primary partitions is in use.
Adding logical partition 6
First sector (209715200-629145599, default 209715200):
Last sector, +sectors or +size{K,M,G,T,P} (209715200-629145599, default 629145599):
Created a new partition 6 of type 'Linux' and of size 200 GiB.
Command (m for help): p # 查看新增的分區
Disk /dev/sda: 300 GiB, 322122547200 bytes, 629145600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xa88f1366
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 999423 997376 487M 83 Linux
/dev/sda2 1001470 629145599 628144130 299.5G 5 Extended
/dev/sda5 1001472 209713151 208711680 99.5G 8e Linux LVM
/dev/sda6 209715200 629145599 419430400 200G 83 Linux
Partition 2 does not start on physical sector boundary.
Command (m for help): t # 改變分區類型為 Linux LVM
Partition number (1,2,5,6, default 6): 6 # sda6
Partition type (type L to list all types): 8e # LVM 類型的 Id 代碼
Changed type of partition 'Linux' to 'Linux LVM'.
Command (m for help): p # 再次查看分區情況
Disk /dev/sda: 300 GiB, 322122547200 bytes, 629145600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xa88f1366
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 999423 997376 487M 83 Linux
/dev/sda2 1001470 629145599 628144130 299.5G 5 Extended
/dev/sda5 1001472 209713151 208711680 99.5G 8e Linux LVM
/dev/sda6 209715200 629145599 419430400 200G 8e Linux LVM
Partition 2 does not start on physical sector boundary.
Command (m for help): wq # 確認沒有問題，保存退出
The partition table has been altered.
Calling ioctl() to re-read partition table.
Re-reading the partition table failed.: Device or resource busy
The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).新分區合并到相應 Volumn Group
運行命令
root@vm003:~# vgdisplay --- Volume group --- VG Name Ubuntu System ID Format lvm2
可以看出我們要操作的VG Name 為 Ubuntu，記錄下來。
接著運行命令
root@vm003:~# vgextend Ubuntu /dev/sda6 # /dev/sda6 是剛剛增加的 LVM 分區 Device /dev/sda6 not found (or ignored by filtering). Unable to add physical volume '/dev/sda6' to volume group 'Ubuntu'.
呃，，，提示沒有找到 /dev/sda6 這個設備，還是重啟一下好了。
root@vm003:~# reboot
重啟后再次執行
root@vm003:~# vgextend Ubuntu /dev/sda6 # /dev/sda6 是剛剛增加的 LVM 分區 Physical volume "/dev/sda6" successfully created Volume group "Ubuntu" successfully extended
再查看一下 Volumn Group 的狀態，運行命令
root@vm003:~# vgs VG #PV #LV #SN Attr VSize VFree Ubuntu 2 2 0 wz--n- 299.52g 200.00g
確實加進去了。
然后運行
root@vm003:~# lvdisplay --- Logical volume --- LV Path /dev/Ubuntu/root LV Name root VG Name Ubuntu
我們知道了 Ubuntu VG 的 LV Path 是 /dev/Ubuntu/root，記錄下來。
然后運行
root@vm003:~# lvresize -l +100%FREE /dev/Ubuntu/root # /dev/Ubuntu/root 是 LV Path Size of logical volume Ubuntu/root changed from 95.52 GiB (24453 extents) to 295.52 GiB (75652 extents). Logical volume root successfully resized.
這就成功啦。
警告： 如果操作時出現下面這樣的 warning，就說明現在 logic volumn 的總大小還不對，resize 不但不增加空間，反而在縮小空間，如果繼續操作下去，必將丟失數據。應立即停止！按 n 取消。
WARNING: Reducing active and open logical volume to 32.00 MiB
THIS MAY DESTROY YOUR DATA (filesystem etc.)
Do you really want to reduce root? [y/n]*
更新文件系統
最后一步，運行命令
root@vm003:~# resize2fs -p /dev/mapper/Ubuntu-root # /dev/mapper/Ubuntu-root 是從 df 命令看到的文件系統信息 resize2fs 1.42.13 (17-May-2015) Filesystem at /dev/mapper/Ubuntu-root is mounted on /; on-line resizing required old_desc_blocks = 6, new_desc_blocks = 19 The filesystem on /dev/mapper/Ubuntu-root is now 77467648 (4k) blocks long.
這個過程可能會花幾分鐘時間，耐心等待就好了。
然后運行 df 命令查看磁盤使用
root@vm003:~# df -h Filesystem Size Used Avail Use% Mounted on udev 3.9G 0 3.9G 0% /dev tmpfs 798M 8.6M 789M 2% /run /dev/mapper/Ubuntu-root 291G 88G 191G 32% / tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 472M 382M 66M 86% /boot tmpfs 100K 0 100K 0% /run/lxcfs/controllers tmpfs 798M 0 798M 0% /run/user/0
大功告成！
參考：
https://www.jb51.net/article/139565.htm
總結
以上就是這篇文章的全部內容了，希望本文的內容對大家的學習或者工作具有一定的參考學習價值，如果有疑問大家可以留言交流，謝謝大家對創新互聯的支持。
