進入特權模式
創新互聯建站長期為近千家客戶提供的網站建設服務,團隊從業經驗10年,關注不同地域、不同群體,并針對不同對象提供差異化的產品和服務;打造開放共贏平臺,與合作伙伴共同營造健康的互聯網生態環境。為耒陽企業提供專業的成都網站設計、做網站、成都外貿網站建設公司,耒陽網站改版等技術服務。擁有10多年豐富建站經驗和眾多成功案例,為您定制開發。
enable
退出特權模式
disable
進入全局模式
configure terminal
進入接口模式
interface fastEthernet 0/1
查看軟硬件信息(寄存器值)
R1#show version
R1#show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 17-Mar-08 15:23 by dchih
ROM: ROMMON Emulation Microcode
ROM: C2600 Software (C2600-J1S3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)
R1 uptime is 4 minutes
System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown"
cisco 2621 (MPC860) processor (revision 0x202) with 56320K/9216K bytes of memory.
Processor board ID FTX0945W0MY (4279256517)
M860 processor: part number 0, mask 0
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
IOS解釋:flsah可以放很多的IOS。默認是從第一個IOS啟動,第一個啟動不了啟動第二個。IOS應該有2個,最小的IOS 1M~2M放在ROM里面,ROM是不可擦也不可寫的。提供最基本的IOS恢復功能。
查看運行的配置文件
Switch#show running-config
解釋:running-config是存在NVRAM里面的,當IOS啟動的時候把NVRAM里面的running-config拷貝到RAM里面去運行,Switch#show running-config是調用RAM里面的配置文件
查看NVRAM配置文件
Switch#show startup-config
查看所有接口的信息
Switch#show interfaces
查看指定接口的信息
Switch#show interfaces FastEthernet 0/1
FastEthernet0/1 is down, line protocol is down (disabled)
Hardware is Lance, address is 0050.0fac.b501 (bia 0050.0fac.b501)
BW 100000 Kbit, DLY 1000 usec,
解釋:0/1 0代表第幾模塊,1代表模塊里面的第幾個接口