這篇文章主要介紹Redhat6.4如何安裝Oracle10.2.0.5 64位數據庫，文中介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們一定要看完！
涇川網站制作公司哪家好，找創新互聯！從網頁設計、網站建設、微信開發、APP開發、響應式網站建設等網站項目制作，到程序開發，運營維護。創新互聯公司2013年成立到現在10年的時間，我們擁有了豐富的建站經驗和運維經驗，來保證我們的工作的順利進行。專注于網站建設就選創新互聯。
實驗環境：
操作系統：Redhat 6.4 64位
數據庫：Oracle10.2.0.1 64位安裝包 + Oracle10.2.0.5 64位升級包
一、安裝前環境準備
1、安裝Redhat6.4操作系統
操作系統的具體安裝在這里我就不再說了
2、安裝介質的準備
Oracle10.2.0.1的安裝包：10201_database_linux_x86_64.cpio.gz
Oracle10.2.0.5的升級包：p8202632_10205_Linux-x86-64.zip
3、軟硬件環境檢查
（1）內存和交換空間檢查
[root@seiang10g ~]# grep MemTotal /proc/meminfo
MemTotal: 2726460 kB
[root@seiang10g ~]# grep SwapTotal /proc/meminfo
SwapTotal: 2736120 kB
[root@seiang10g ~]# free -m
total used free shared buffers cached
Mem: 2662 1753 909 0 19 1510
-/+ buffers/cache: 222 2440
Swap: 2671 0 2671
（2）磁盤空間檢查
[root@seiang10g ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_seiang10g-lv_root
47G 4.2G 40G 10% /
tmpfs 1.4G 72K 1.4G 1% /dev/shm
/dev/sda1 485M 37M 423M 9% /boot
/dev/sr0 3.5G 3.5G 0 100% /mnt/dvd
（3）CPU及系統架構檢查
[root@seiang10g ~]# grep "model name" /proc/cpuinfo
model name : Intel(R) Xeon(R) CPU X3430 @ 2.40GHz
[root@seiang10g ~]# uname -a
Linux seiang10g.comsys.com 2.6.32-358.el6.x86_64 #1 SMP Tue Jan 29 11:47:41 EST 2013 x86_64 x86_64 x86_64 GNU/Linux
（4）必須安裝包的檢查
[root@ seiang10g database]# firefox welcome.html
官方文檔要求如下：
從文檔中可以看出Oracle 10g只支持到Red Hat Enterprise Linux 4.0，并沒有明確表示支持Red Hat Enterprise Linux 6.0以上的版本. 這是因?yàn)镺racle官方并沒有在4以后的版本測試過Oracle 10g。根據要求，安裝相應的安裝包。
[root@seiang10g ~]# yum install binutils* compat* control-center* gcc* glibc* gnome-libs* libstdc* make* sysstat* xscreensaver* unixODBC* lib*
4、環境準備
（1）創建組和用戶
[root@seiang10g ~]# groupadd oinstall
[root@seiang10g ~]# groupadd dba
[root@seiang10g ~]# useradd -g oinstall -G dba oracle
[root@seiang10g ~]# passwd oracle
Changing password for user oracle.
New password:
BAD PASSWORD: it is based on a dictionary word
BAD PASSWORD: is too simple
Retype new password:
passwd: all authentication tokens updated successfully
（2）創建相關目錄
[root@seiang10g ~]# mkdir -p /u01/app/oracle
[root@seiang10g ~]# chown -R oracle:oinstall /u01/app/oracle
[root@seiang10g ~]# chmod -R 775 /u01/app/oracle
（3）配置Linux內核參數及環境限制
[root@seiang10g ~]# vim /etc/sysctl.conf
kernel.shmall = 4294967296
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
[root@seiang10g ~]# vim /etc/security/limits.conf
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
[root@seiang10g ~]# vi /etc/pam.d/login
session required /lib/security/pam_limits.so
session required pam_limits.so
（4）修改Oracle用戶環境變量
[oracle@seiang10g ~]$ vim .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_SID=seiang
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/10.2/dbhome_1
export ORACLE_OWNER=oracle
export PATH=$ORACLE_HOME/bin:$PATH
umask 022
（5）禁用SELinux和關閉防火墻
[root@seiang10g ~]# vim /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
[root@seiang10g ~]# service iptables stop
iptables: Flushing firewall rules: [ OK ]
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Unloading modules: [ OK ]
[root@seiang10g ~]# service iptables status
iptables: Firewall is not running.
[root@seiang10g ~]# chkconfig iptables off
[root@seiang10g ~]# chkconfig iptables --list
iptables 0:off 1:off 2:off 3:off 4:off 5:off 6:off
（6）修改/etc/hosts文件
[root@seiang10g ~]# vim /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.1.1.47 seiang10g.comsys.com seiang10g
二、安裝Oracle軟件
1、解壓安裝包
[root@seiang10g software]# gunzip 10201_database_linux_x86_64.cpio.gz
[root@seiang10g software]# cpio -idmv < 10201_database_linux_x86_64.cpio
[root@seiang10g software]# unzip p8202632_10205_Linux-x86-64.zip
解壓出來的目錄為database和Disk1
[oracle@seiang10g ~]$ cd /u01/software/database/
[oracle@seiang10g database]$ ll
total 36
drwxrwxr-x 9 94110 42424 4096 Oct 20 2005 doc
drwxr-xr-x 5 94110 42424 4096 Oct 23 2005 install
drwxr-xr-x 2 94110 42424 4096 Oct 23 2005 response
-rwxr-xr-x 1 94110 42424 1326 Oct 23 2005 runInstaller
drwxrwxr-x 9 94110 42424 12288 Oct 23 2005 stage
-rw-rw-r-- 1 94110 42424 5416 Oct 20 2005 welcome.html
2、執行./runInstaller
[oracle@seiang10g database]$ export DISPLAY=10.1.1.123:0.0
報錯信息1：
[oracle@seiang10g database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, redhat-6, UnitedLinux-1.0, asianux-1, asianux-2, asianux-3, enterprise-4, enterprise-5 or SuSE-11
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2017-07-11_10-49-36AM. Please wait ...[oracle@seiang10g Disk1]$ Oracle Universal Installer, Version 10.2.0.5.0 Production
Copyright (C) 1999, 2010, Oracle. All rights reserved.
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2017-07-11_10-49-36AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2017-07-11_10-49-36AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
錯誤原因：
一般是卻少libXp的包
解決辦法：
[root@seiang10g Packages]# rpm -qa libXp*
[root@seiang10g Packages]# yum install libXp*
報錯信息2：
[oracle@seiang10g database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, redhat-6, UnitedLinux-1.0, asianux-1, asianux-2, asianux-3, enterprise-4, enterprise-5 or SuSE-11
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2017-07-11_10-57-11AM. Please wait ...[oracle@seiang10g Disk1]$ Oracle Universal Installer, Version 10.2.0.5.0 Production
Copyright (C) 1999, 2010, Oracle. All rights reserved.
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2017-07-11_10-57-11AM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2017-07-11_10-57-11AM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
錯誤原因：
一般是卻少libXtst的包
解決辦法：
[root@seiang10g Packages]# rpm -qa libXtst*
[root@seiang10g Packages]# yum install libXtst*
報錯信息3：
[oracle@seiang10g database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, redhat-6, UnitedLinux-1.0, asianux-1, asianux-2, asianux-3, enterprise-4, enterprise-5 or SuSE-11
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2017-07-11_11-00-09AM. Please wait ...[oracle@seiang10g Disk1]$ Oracle Universal Installer, Version 10.2.0.5.0 Production
Copyright (C) 1999, 2010, Oracle. All rights reserved.
Can't connect to X11 window server using '10.1.1.123:0.0' as the value of the DISPLAY variable.
10.1.1.123:0.0
10.1.1.123:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '10.1.1.123:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to :, where the is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
%
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
出現這個錯誤是由于當前用戶不是oracle或者環境變量設置的不正確導致的，因?yàn)槊看味际怯胦racle用戶解壓，安裝，沒有遇到這個問題，所以也沒有仔細研究過這個錯誤。經過在網上查詢相關的資料找到了出錯的原因：
可以參考一下http://blog.sina.com.cn/s/blog_73582d750100ppto.html（鏈接內容如下：）
cause:
X-Windows emulation is not yet correctly configured or is being mis-used.
solution:
1.Make sure that "DISPLAY” is set properly as either:
:0.0
or
:0.0
note:In this example, ip_address/hostnameis the host name or IP address of
the system that you want to use to display Oracle Universal Installer (your
workstation or PC).
eg.[root@rac1 ~]# xhost +
access control disabled, clients can connect from any host
[root@rac1 ~]# su - oracle
[oracle@rac1 ~]$ export DISPLAY=192.16.2.98:0.0
[oracle@rac1 ~]$ cd database/
[oracle@rac1 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4,
UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from
/tmp/OraInstall2009-03-05_03-36-28PM. Please wait ...[oracle@rac1 database]$
Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
2. Oracle Customer Support has seen
instances where use of the UNIX/Linux “su” command, even “su - oracle” has
caused this “Can't connect to X11 window server” error. Therefore, please be
sure that you are LOGGED ON as the oracle account. Log directly into the
install session. Do not use any variety of “su”.
use oracle log on , not "su - oracle"
eg. [oracle@rac1 database]$ ./runInstaller
3.Oracle Customer Support has seen instances where the incorrect “ulimit” setting for number of files (aka “-n”, aka “nofiles”) has caused this “Can't connect to X11 window server” error. Therefore, please be sure that your values for “nofiles” in the output of “ulimit -a” is at least 65536.
備注：前2個辦法只需要滿足其中一個就可以避免這個錯誤了：直接用oracle登陸，不能su - oracle or 設置display=ip_address_that you want to use to display Oracle Universal Installer：0.0
通過直接使用oracle用戶登錄解決了上面所產生的問題；
下面開始o(jì)racle10.2.0.1；
[oracle@seiang10g database]$ ./runInstaller
在安裝到83%的時候報如下錯誤
在安裝到83%的時候，報如上錯誤：進入持續運行狀態之后，在link步驟Oracle終止操作，報錯說link失敗，然后查看安裝的所產生的日志信息：
[root@seiang10g ~]# tail -60 /u01/app/oraInventory/logs/installActions2017-07-11_04-01-22PM.log
INFO: mv ctxlc /u01/app/oracle/product/10.2.0/dbhome_1/bin/ctxlc
INFO: chmod 751 /u01/app/oracle/product/10.2.0/dbhome_1/bin/ctxlc
INFO: gcc -m32 -o ctxhx -L/u01/app/oracle/product/10.2.0/dbhome_1/ctx//lib32/ -L/u01/app/oracle/product/10.2.0/dbhome_1/lib32/ -L/u01/app/oracle/product/10.2.0/dbhome_1/lib32/stubs/ /u01/app/oracle/product/10.2.0/dbhome_1/ctx/lib/ctxhx.o -L/u01/app/oracle/product/10.2.0/dbhome_1/ctx/lib/ -ldl -lm -lctxhx -Wl,-rpath,/u01/app/oracle/product/10.2.0/dbhome_1/ctx/lib -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /u01/app/oracle/
INFO: product/10.2.0/dbhome_1/lib/sysliblist`
INFO: /usr/bin/ld: crt1.o: No such file: No such file or directory
collect2: ld returned 1 exit status
INFO: make: *** [ctxhx] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/dbhome_1/ctx/lib/ins_ctx.mk'.
See '/u01/app/oraInventory/logs/installActions2017-07-11_04-01-22PM.log' for details.
Exception Severity: 1
報錯原因：
查詢后，發現是安裝依賴包的問題glibc-devel。在32bit環境下，我們使用rpm直接安裝或者yum安裝時，只安裝32bit版本就可以了。但是在64bit環境下，是需要將兩個版本的均進行安裝。這個過程中是需要嚴格遵守文檔對安裝包的要求。
解決方法：
[root@seiang10g Packages]# yum install glibc*
Retry之后又出現上面的報錯信息，然后查看相關安裝日志：
INFO: make[1]: Leaving directory `/u01/app/oracle/product/10.2.0/dbhome_1/sysman/lib'
INFO: make[1]: *** [/u01/app/oracle/product/10.2.0/dbhome_1/sysman/lib/libnmemso.so] Error 1
make: *** [libnmemso] Error 2
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmo nmb' of makefile '/u01/app/oracle/product/10.2.0/dbhome_1/sysman/lib/ins_sysman.mk'.
See '/u01/app/oraInventory/logs/installActions2017-07-11_04-01-22PM.log' for details.
Exception Severity: 1
點擊continue;
INFO: make[1]: Leaving directory `/u01/app/oracle/product/10.2.0/dbhome_1/rdbms/lib'
INFO: make[1]: *** [/u01/app/oracle/product/10.2.0/dbhome_1/rdbms/lib/extproc32] Error 1
make: *** [extproc32] Error 2
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'all_no_orcl' of makefile '/u01/app/oracle/product/10.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk'.
See '/u01/app/oraInventory/logs/installActions2017-07-11_04-01-22PM.log' for details.
Exception Severity: 1
點擊continue;
INFO: make[1]: Leaving directory `/u01/app/oracle/product/10.2.0/dbhome_1/sysman/lib'
INFO: make[1]: *** [/u01/app/oracle/product/10.2.0/dbhome_1/sysman/lib/nmccollector] Error 1
make: *** [nmccollector] Error 2
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'collector' of makefile '/u01/app/oracle/product/10.2.0/dbhome_1/sysman/lib/ins_emdb.mk'.
See '/u01/app/oraInventory/logs/installActions2017-07-11_04-01-22PM.log' for details.
Exception Severity: 1
這個問題是比較復雜的，筆者查詢了很多資料也沒有一個確切的回應。最后在網絡上檢索到一位前輩的解決之道。
首先點擊ignore跳過步驟，后面就可以直接完成runInstaller腳本執行。在$ORACLE_HOME/bin目錄下，修改oracle文件為oracle.bin。
創建文件oracle在相同目錄，內容如下：
#!/bin/bash
export DISABLE_HUGETLBFS=1
exec $ORACLE_HOME/bin/oracle.bin $@
EOF
保存后使用chmod a+x oracle命令對文件進行權限修改。經過這種策略修改之后，Oracle后續的dbca過程創建數據庫執行正常。
[root@seiang10g ~]# /u01/app/oracle/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
[root@seiang10g ~]# /u01/app/oracle/product/10.2.0/dbhome_1/root.sh
Running Oracle10 root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.2.0/dbhome_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
三、安裝Oracle10.2.0.5.0
安裝升級Oracle10.2.0.5是為了后面數據庫運行的穩定，避免出現諸多的bug
如果在環境檢查的時候出現這個問題，如下所示：
環境檢查中具體的報錯信息如下所示：
Checking for Oracle Home incompatibilities ...
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Failed <<<<
Problem: This software can only be installed into an existing Oracle Database 10g Oracle Home.
Recommendation: Choose an existing Oracle Database 10g Oracle Home for installing this software.
原因是由于oracle10.2.0.5是升級包，必須要在已有的數據庫前提下進行安裝，報錯的原因是沒有已經存在的數據庫
正確的情況下：
安裝進度完成后也需要執行一個腳本，注意這里執行的時候設計到覆蓋重寫的問題，全部選擇YES
[root@seiang10g ~]# /u01/app/oracle/product/10.2.0/dbhome_1/root.sh
Running Oracle 10g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.2.0/dbhome_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
四、創建數據庫
以上是“Redhat6.4如何安裝Oracle10.2.0.5 64位數據庫”這篇文章的所有內容，感謝各位的閱讀！希望分享的內容對大家有幫助，更多相關知識，歡迎關注創新互聯行業資訊頻道！
重慶分公司
重慶分公司
