1.初始狀態：Master，slave均為running狀態。

廣西網站建設公司創新互聯公司,廣西網站設計制作，有大型網站制作公司豐富經驗。已為廣西成百上千提供企業網站建設服務。企業網站搭建\成都外貿網站制作要多少錢，請找那個售后服務好的廣西做網站的公司定做！

2.升級過程

Master

1).關閉 master 記錄最后檢查點位置 （latest checkpoint location），這是宕機時間開始的地方 (This is where your downtime starts)。
postgres用戶執行以下命令：

$ pg_ctl -D $PGDATA stop -m fast

$ pg_controldata  | grep "Latest checkpoint location"

$ Latest checkpoint location:           0/C619840

2).關閉slave 比較最后檢查點

$ pg_ctl -D $PGDATA stop -m fast

$ pg_controldata  | grep "Latest checkpoint location"

$ Latest checkpoint location:           0/C619840

因為兩個檢查點位置一致，我們確認 standby 應用了所有日志，Master和Slave數據沒有差異.

3).保存舊版本配置文件
$ cp /u02/pgdata/testmig/postgresql.conf /var/tmp
$ cp /u02/pgdata/testmig/pg_hba.conf /var/tmp
$ cp /u02/pgdata/testmig/postgresql.conf /var/tmp
$ cp /u02/pgdata/testmig/pg_hba.conf /var/tmp

4).Master使用鏈接方式升級，如果多核服務器使用“-j”選項，并行執行pg_upgrade

$ export PGDATAOLD=/u02/pgdata/testmig/
$ export PGDATANEW=/u02/pgdata/testmig95/
$ export PGBINOLD=/u01/app/postgres/product/91/db_8/bin/
$ export PGBINNEW=/u01/app/postgres/product/95/db_5/bin/
 
$ /u01/app/postgres/product/95/db_5/bin/pg_upgrade -k
(Usually you’d do a “-c” check run before doing the real upgrade). When using link mode the files get hard-linked instead of copied which is much faster and saves disk space. The downside is that you can not revert to the old cluster in case anything goes wrong. When it goes fine, it looks like this:

Performing Consistency Checks
-----------------------------
Checking cluster versions                                   ok
Checking database user is the install user                  ok
Checking database connection settings                       ok
Checking for prepared transactions                          ok
Checking for reg* system OID user data types                ok
Checking for contrib/isn with bigint-passing mismatch       ok
Checking for invalid "line" user columns                    ok
Creating dump of global objects                             ok
Creating dump of database schemas
                                                            ok
Checking for presence of required libraries                 ok
Checking database user is the install user                  ok
Checking for prepared transactions                          ok

If pg_upgrade fails after this point, you must re-initdb the
new cluster before continuing.

Performing Upgrade
------------------
Analyzing all rows in the new cluster                       ok
Freezing all rows on the new cluster                        ok
Deleting files from new pg_clog                             ok
Copying old pg_clog to new server                           ok
Setting next transaction ID and epoch for new cluster       ok
Deleting files from new pg_multixact/offsets                ok
Setting oldest multixact ID on new cluster                  ok
Resetting WAL archives                                      ok
Setting frozenxid and minmxid counters in new cluster       ok
Restoring global objects in the new cluster                 ok
Restoring database schemas in the new cluster
                                                            ok
Setting minmxid counter in new cluster                      ok
Adding ".old" suffix to old global/pg_control               ok

If you want to start the old cluster, you will need to remove
the ".old" suffix from /u02/pgdata/testmig/global/pg_control.old.
Because "link" mode was used, the old cluster cannot be safely
started once the new cluster has been started.

Linking user relation files
                                                            ok
Setting next OID for new cluster                            ok
Sync data directory to disk                                 ok
Creating script to analyze new cluster                      ok
Creating script to delete old cluster                       ok

Upgrade Complete
----------------
Optimizer statistics are not transferred by pg_upgrade so,
once you start the new server, consider running:
    ./analyze_new_cluster.sh

Running this script will delete the old cluster's data files:
    ./delete_old_cluster.sh

5).恢復配置文件到新目錄

$ mkdir -p /u02/pgdata/testmig95/pg_log
$ cp /var/tmp/postgresql.conf /u02/pgdata/testmig95/postgresql.conf 
$ cp /var/tmp/pg_hba.conf /u02/pgdata/testmig95/pg_hba.conf

6).啟動、停止更新的實例，檢查日志文件中一切正常

$ /u01/app/postgres/product/95/db_5/bin/pg_ctl -D /u02/pgdata/testmig95/ -l /u02/pgdata/testmig95/pg_log/log.log start   
$ /u01/app/postgres/product/95/db_5/bin/pg_ctl -D /u02/pgdata/testmig95/ stop 

數據庫集群現在已經運行，數據庫完整關閉（計劃重建standby）

Slave

1).保存配置文件
$ cp /u02/pgdata/testmig/postgresql.conf /var/tmp
$ cp /u02/pgdata/testmig/pg_hba.conf /var/tmp
$ cp /u02/pgdata/testmig/recovery.conf /var/tmp

同步master目錄到standby(this will be very fast because it will create hard links on the standby server instead of copying the user files):

$ cd /u02/pgdata  
$ rsync --archive --delete --hard-links --size-only testmig testmig95 192.168.22.33:/u02/pgdata
$ cd /u03
$ rsync -r pgdata/testmig95 192.168.22.33:/u03/pgdata/testmig95

2).standby恢復配置文件
$ cp /var/tmp/postgresql.conf /u02/pgdata/testmig95/postgresql.conf
$ cp /var/tmp/pg_hba.conf /u02/pgdata/testmig95/pg_hba.conf
$ cp /var/tmp/recovery.conf /u02/pgdata/testmig95/recovery.conf

3).啟動master
$ export PATH=/u01/app/postgres/product/95/db_5/bin:$PATH
$ pg_ctl -D /u02/pgdata/testmig95/ start -l /u02/pgdata/testmig95/pg_log/log.log

4).啟動standby
$ export PATH=/u01/app/postgres/product/95/db_5/bin:$PATH
$ pg_ctl -D /u02/pgdata/testmig95/ start -l /u02/pgdata/testmig95/pg_log/log.log

5).檢查standby日志文件

LOG:  database system was shut down at 2017-01-19 07:51:24 GMT
LOG:  creating missing WAL directory "pg_xlog/archive_status"
LOG:  entering standby mode
LOG:  started streaming WAL from primary at 0/E000000 on timeline 1
LOG:  consistent recovery state reached at 0/E024D38
LOG:  redo starts at 0/E024D38
LOG:  database system is ready to accept read only connections

6).standby其它檢查工作

$ psql
psql (9.5.5)
Type "help" for help.
 
postgres=# select pg_is_in_recovery();
 pg_is_in_recovery
-------------------
 t
(1 row)
 
postgres=# \dx
                        List of installed extensions
   Name    | Version |   Schema   |               Description              
-----------+---------+------------+-----------------------------------------
 adminpack | 1.0     | pg_catalog | administrative functions for PostgreSQL
 plpgsql   | 1.0     | pg_catalog | PL/pgSQL procedural language
(2 rows)
 
postgres=# \c testmig
You are now connected to database "testmig" as user "postgres".
testmig=# \dx
                                       List of installed extensions
      Name      | Version |   Schema   |                            Description                           
----------------+---------+------------+-------------------------------------------------------------------
 pg_buffercache | 1.0     | public     | examine the shared buffer cache
 pg_trgm        | 1.0     | public     | text similarity measurement and index searching based on trigrams
 plpgsql        | 1.0     | pg_catalog | PL/pgSQL procedural language
(3 rows)
 
testmig=# \d
              List of relations
 Schema |       Name       | Type  |  Owner  
--------+------------------+-------+----------
 public | pg_buffercache   | view  | postgres
 public | pgbench_accounts | table | postgres
 public | pgbench_branches | table | postgres
 public | pgbench_history  | table | postgres
 public | pgbench_tellers  | table | postgres
(5 rows)
 
testmig=# select count(*) from pgbench_accounts;
  count 
---------
 1000000
(1 row)

7).master運行analyze_new_cluster.sh

$ ./analyze_new_cluster.sh
This script will generate minimal optimizer statistics rapidly
so your system is usable, and then gather statistics twice more
with increasing accuracy.  When it is done, your system will
have the default level of optimizer statistics.
 
If you have used ALTER TABLE to modify the statistics target for
any tables, you might want to remove them and restore them after
running this script because they will delay fast statistics generation.
 
If you would like default statistics as quickly as possible, cancel
this script and run:
    "/u01/app/postgres/product/95/db_5/bin/vacuumdb" --all --analyze-only
 
vacuumdb: processing database "postgres": Generating minimal optimizer statistics (1 target)
vacuumdb: processing database "template1": Generating minimal optimizer statistics (1 target)
vacuumdb: processing database "testmig": Generating minimal optimizer statistics (1 target)
vacuumdb: processing database "postgres": Generating medium optimizer statistics (10 targets)
vacuumdb: processing database "template1": Generating medium optimizer statistics (10 targets)
vacuumdb: processing database "testmig": Generating medium optimizer statistics (10 targets)
vacuumdb: processing database "postgres": Generating default (full) optimizer statistics
vacuumdb: processing database "template1": Generating default (full) optimizer statistics
vacuumdb: processing database "testmig": Generating default (full) optimizer statistics

8).master刪除舊的集群

$ ./delete_old_cluster.sh

復制腳本到 standby 或者手工刪除舊的 standby
$ rm -rf /u02/pgdata/testmig
$ rm -rf /u03/pgdata/testmig